Puerta de entrada principal, de tambor Ancho de marco 72.6 mm | Ancho de hoja 44.4 mm Ancho y Alto: personalizable a la medida deseada Apertura: Interior derecha, interior izquierda o exterior derecha, exterior izquierda Acabados: 52 opciones Incluye accesorios para armado e instalación Chapa y cilindro de Acero Inoxidable: 8 opciones La chapa, bisagras y barras de armado se encuentran preinstaladas Bisagras al color de la puerta Incluye 3 llaves de puntos Adicionales de seguridad: cerradura medio cilindro, bloqueo de seguridad Opcional: Sardinel con apertura exterior Recomendable con aislante termo acústico Medidas sugeridas para buen funcionamiento: Ancho de 0.65 m hasta 1.20 m, alto de 1.50 m hasta 2.60 m Tiempo de armado aproximado: 30 min entre dos personas Grado de dificultad: Alto
Puerta de entrada principal, de tambor Ancho de marco 72.6 mm | Ancho de hoja 44.4 mm Ancho y Alto: personalizable a la medida deseada Apertura: Interior derecha, interior izquierda o exterior derecha, exterior izquierda Acabados: 52 opciones Incluye accesorios para armado e instalación Chapa y cilindro de Acero Inoxidable: 8 opciones La chapa, bisagras y barras de armado se encuentran preinstaladas Bisagras al color de la puerta Incluye 3 llaves de puntos Adicionales de seguridad: cerradura medio cilindro, bloqueo de seguridad Opcional: Sardinel con apertura exterior Recomendable con aislante termo acústico Medidas sugeridas para buen funcionamiento: Ancho de 0.65 m hasta 1.20 m, alto de 1.50 m hasta 2.60 m Tiempo de armado aproximado: 30 min entre dos personas Grado de dificultad: Alto
Marco lado bisagras Marco lado contra Marco superior Lateral con chapa Lateral lado bisagra Zoclo Cabezal Intermedios de 4" (variable de acuerdo a la altura de la puerta) Tapa Lisa Tapa Felpas
Nivel Espátulas de sellado para silicón Mazo de goma Cinta Pistola de calafateo
Ajuste lado contra Ángulos Tornillos de armado Escuadras Pijas CF allen 10 x 1 1/2" Tornillo de ajuste Taquetes 1/4" Llave allen 3 mm Llave allen 4 mm Llave allen 8 mm
All the pieces that build up our door go through an anodizing process. The anodized is an electrolytic process of forced oxidation, where it generates a cover of aluminium oxide at the metal surface. At this process, it can goal several colour tones. The micronage at Perfiletto´s profiles, rounds between 12 to 16 microns. Our anodized has quality control for the colour tones.
This a finish given to the aluminium pieces where is applied a polyurethane class 2 superdurable base and then the piece is sublimated with heat transferable ink of polyester, achieving by this way the wood finish. The look maintains the wood veins and knots. The micronage at the wood sublimate process varies between 75 to 90 microns.
The aluminium pieces have a surface pretreatment process, where the pores open. Afterwards, powder paint (38 Series Superdurable) is applied, and it melts at the surface during the cured process. This ensures the adherence of the paint to the profile, achieving UV rays’ high resistance. The micronage at the electrostatic paint process varies between 80 to 100 microns.
Our pieces and accessories are submitted to saline corrosion tests, according to standard ASTM B117, which said that every 1000 h of exposure are suchlike 10 years exposed to beach or coast environment. At Perfiletto, the samples are submitted to more aggressive tests than indicated by the standard. They are tested on cycles of 3000 h, which are equivalent to an average of 20 to 30 years, maintaining their properties.
The finishes of our aluminium pieces and plastic accessories are submitted to 8000 h. test, suchlike 30 years of UV exposure. It is noted that at 2400 h, which is equivalent to 9 years approximately, there are not considerable disturbances at colour and brightness. At 8000 h, the disturbances still being almost imperceptible.
Before ordering your door, it is necessary to measure the door frame where you going to install the door. Follow the next rules: First, you must measure at 3 horizontal sections (Top border, At the middle space and bottom border). Then you must repeat at 3 vertical sections (Both lateral borders and at the middle). It is possible that the 3 measurements could be different, if the difference between them is minimum, you got to choose th
Tu puerta cuenta con piezas de ajuste para cuando las medidas de tu vano son irregulares (normalmente lo son), esta te permitirá ajustar un rango de 1 cm en los laterales, esto buscando mantener tu puerta perfectamente nivelada, y evitando que esta se descuadre o se cuelgue. Revisa el video de instalación para conocer mas cómo funciona (VER VIDEO).
ENG 
