Do it yourself
IMG-LOGO
Presupuesto

TAMBURO DOOR

Puerta para interiores, de tambor
Ancho de marco 41.1 mm | Ancho de hoja 27.2 mm
Medidas ancho y alto: personalizables
Apertura: Interior derecha, interior izquierda o exterior derecha, exterior izquierda
Acabados: 52 opciones
Incluye accesorios para armado e instalación
La chapa, bisagras y barras de armado se encuentran preinstaladas
Incluye 2 llaves
Bisagras en color negro
Opción de sardinel, para apertura exterior
Tiempo de armado aproximado: 30 min entre dos personas
Grado de dificultad: Medio
Medidas sugeridas para buen funcionamiento: Ancho de 0.70 m hasta 1.10 m, alto de 1.50 m hasta 2.50 m
More information


TAMBURO DOOR

Puerta para interiores, de tambor
Ancho de marco 41.1 mm | Ancho de hoja 27.2 mm
Medidas ancho y alto: personalizables
Apertura: Interior derecha, interior izquierda o exterior derecha, exterior izquierda
Acabados: 52 opciones
Incluye accesorios para armado e instalación
La chapa, bisagras y barras de armado se encuentran preinstaladas
Incluye 2 llaves
Bisagras en color negro
Opción de sardinel, para apertura exterior
Tiempo de armado aproximado: 30 min entre dos personas
Grado de dificultad: Medio
Medidas sugeridas para buen funcionamiento: Ancho de 0.70 m hasta 1.10 m, alto de 1.50 m hasta 2.50 m

IMG

Componentes de puerta, están numeradas en el orden de armado

Marco lado contra
Marco lado bisagras
Marco superior
Lateral con chapa
Lateral lado Bisagra
Zoclo
Cabezal
Intermedios (variable de acuerdo a la altura de la puerta)
Tapa Lisa
Tapa Felpas

IMG

Accesorios para instalación

Nivel
Espátulas de sellado para silicón
Mazo de goma
Cinta
Pistola de calafateo

IMG

Accesorios para armado

Ajuste contra
Ángulos
Tornillo de armado
Pijas CF allen 10 x 1 1/2"
Tornillo de ajuste
Taquetes 1/4"
Llave allen 3 mm
Llave allen 4 mm
Llave allen 5 mm

IMG

Finishes

IMG
IMG
IMG

Anodized

All the pieces that build up our door go through an anodizing process. The anodized is an electrolytic process of forced oxidation, where it generates a cover of aluminium oxide at the metal surface. At this process, it can goal several colour tones. The micronage at Perfiletto´s profiles, rounds between 12 to 16 microns. Our anodized has quality control for the colour tones.

Wood Sublimate

This a finish given to the aluminium pieces where is applied a polyurethane class 2 superdurable base and then the piece is sublimated with heat transferable ink of polyester, achieving by this way the wood finish. The look maintains the wood veins and knots. The micronage at the wood sublimate process varies between 75 to 90 microns.

Electrostatic Paint

The aluminium pieces have a surface pretreatment process, where the pores open. Afterwards, powder paint (38 Series Superdurable) is applied, and it melts at the surface during the cured process. This ensures the adherence of the paint to the profile, achieving UV rays’ high resistance. The micronage at the electrostatic paint process varies between 80 to 100 microns.

Corrosion Resistance

Our pieces and accessories are submitted to saline corrosion tests, according to standard ASTM B117, which said that every 1000 h of exposure are suchlike 10 years exposed to beach or coast environment. At Perfiletto, the samples are submitted to more aggressive tests than indicated by the standard. They are tested on cycles of 3000 h, which are equivalent to an average of 20 to 30 years, maintaining their properties.

IMG

UV Rays Resistance

The finishes of our aluminium pieces and plastic accessories are submitted to 8000 h. test, suchlike 30 years of UV exposure. It is noted that at 2400 h, which is equivalent to 9 years approximately, there are not considerable disturbances at colour and brightness. At 8000 h, the disturbances still being almost imperceptible.

IMG

Technical Specs

  • Pieces of : 6063 Alloy Aluminum
  • Impact Resistance: Tempered Aluminum T5
  • Hardness: 8 - 12° Webster
  • Minimum Elongation: 16000 lbs/in2
  • Last Resistance: 22000 lbs/in2
  • Elasticity: 10000 lbs/in2
  • Fatigue: 10000 lbs/in2

Other quality tests and standards

  • Thickness Measurement: Positector 6000 Standard: ASTM D – 186
  • Adherence Measurement: Standard: ASTM – 3359
  • Destructive Adherence Measurement: Elcometer
  • Impact Test Standard: ASTM 2794 (De 100 a 160 lbs/in2)

Door frame considerations

Before ordering your door, it is necessary to measure the door frame where you going to install the door. Follow the next rules: First, you must measure at 3 horizontal sections (Top border, At the middle space and bottom border). Then you must repeat at 3 vertical sections (Both lateral borders and at the middle). It is possible that the 3 measurements could be different, if the difference between them is minimum, you got to choose th

IMG

Pieza de ajuste

Tu puerta cuenta con piezas de ajuste para cuando las medidas de tu vano son irregulares (normalmente lo son), esta te permitirá ajustar un rango de 1 cm en los laterales, esto buscando mantener tu puerta perfectamente nivelada, y evitando que esta se descuadre o se cuelgue. Revisa el video de instalación para conocer mas cómo funciona (VER VIDEO).

IMG

Videos

Galery

SKU: Tamburo Categoria: Puertas

Related products